American Megatrends MAN-758 manual J10 Pinout, Connect I/O, Continued

Step 10 Connect I/O, Continued

J10 Pinout	J10 is the primary IDE connector. The J10 pinout is:
		Pin	Use	Pin	Use
		1	-RESET	2	GND
		3	DATA7	4	DATA8
		5	DATA6	6	DATA9
		7	DATA5	8	DATA10
		9	DATA4	10	DATA11
		11	DATA3	12	DATA12
		13	DATA2	14	DATA13
		15	DATA1	16	DATA14
		17	DATA0	18	DATA15
		19	GND	20	KEY(N/C)
		21	-REQ	22	GND
		23	-IOW	24	GND
		25	-IOR	26	GND
		27	IDERDY	28	Pulldown
		29	-ACK	30	GND
		31	INT14	32	N/C
		33	HA1	34	N/C
		35	HA0	36	HA2
		37	-CS0	38	-CS1
		39	-IDEACT	40	GND

J11 Secondary IDE Controller J11, the secondary IDE connector, is a 40-pin dual-inline berg that connects the secondary primary and slave IDE drives to the secondary onboard IDE controller.

Attach the secondary master and slave IDE drives to J11 via a standard 40-pin IDE cable.

Cont’d

Chapter 1 Hardware Installation 33