PROGRAMMING
Use 
and 
buttons to scroll to the baud rate of your computer. Most computers use 38400 baud rate.
Press 
when done.
If “PC CONNECTION” is set to “NO”, the controller will jump to the “PRINTER CONNECTION” screen. If “PC CONNECTION” is set to “YES”, the controller will ask you to select the unit’s ID number.
To change the ID number for a particular chiller, use 
and 
buttons. Press 
when done.
Note: If more than one chiller is connected to the PC, each chiller must have a different ID number.
Use 
and 
buttons to chose Yes or No. Select “YES”, only if the unit is
equipped with a printer, otherwise select “NO”. Press 
when done.
Use 
and 
buttons to scroll to the printer’s baud rate. The provided printer uses 1200 baud rate.
Press 
when done.
Use 
and 
buttons to change the number of food probes. Press 
when done.
Note: The number of food probes you set should be equal with the number of food probes available on the unit.
Use 
and 
buttons to chose Yes or No. Select “YES”, if the unit is equipped
with UV light, otherwise select “NO”. Press 
when done.
Use 
and 
buttons to choose Yes or No. Defrost Cycle is standard for all A.P.C
blast chillers. Set the value to “YES”. Press 
when done.
Use 
and 
buttons to change the number of available air probes. Press 
when done.
Note: The number of air probes you set should be equal with the number of air probes available on the unit.
NAFEM communication is an optional feature. Select “Yes” only if NAFEM communication kit has been purchased.
20
