American Power Conversion AP9221EXPX166 Over the Network by ARP. Address Resolution Protocol To

Quick Configuration continued

Configuring	Over the Network by ARP. (Address Resolution Protocol) To
TCP/IP settings,	configure MasterSwitch VM TCP/IP settings using ARP:

continued

1.Connect the unit to the network.

2.From a command prompt on a computer connected to the local subnet, type arp -sip_addr_card mac_card. See the example below:

arp -s 159.215.240.22 00-c0-b7-78-ad-

90

Note: The MAC address can be found on the Quality Assurance slip, on the TCP/IP menu from the Control Console, and on a sticker on the bottom of the unit.

3.Type telnet ip_addr. See the example below:

telnet 159.215.240.22

The default user name and password are both apc. Configure the correct Subnet Mask and default Gateway in the TCP/IP section of the Network menu.

Continued on next page

13