Quick Configuration, continued
Accessing the | You can access the Environmental Monitoring Unit by using a |
unit | Web browser, Telnet, or SNMP. |
Through a Web browser.
1.From the browser, enter the unit’s System IP address or its DNS name (if a DNS name is configured).
2.Log on to the unit. The default User Name and Password are apc (lowercase).
Through Telnet.
1.Type telnet and the System IP address of the unit.
2.Log on to the unit. The default User Name and Password are apc (lowercase).
Through SNMP. The default
Verifying | To confirm the basic operation of the Environmental | |
configuration | Monitoring Unit: | |
| 1. | Log on to the unit, and select Environmental |
|
| Monitoring Status from the main menu. |
| 2. | Confirm the operation of the probe. With the probe |
|
| properly connected, the unit reports accurate |
|
| temperature and humidity. If the probe is not properly |
|
| connected, the unit reports very low temperature and |
|
| humidity values. |
| 3. | Confirm contact sensing. Activate each sensor in turn, |
|
| according to the recommendation of the sensor |
|
| manufacturer, and verify that it operates as expected. |
14
