Installation, continued
Installing in an | 4. Attach the assembly tightly to the enclosure using four |
enclosure, | mounting screws and four plastic cup washers (provided |
continued | with the enclosure). |
Connecting the 1. Connect the supplied probe (AP9512TH) to one of the
probe(s)probe connectors on the unit. Seat the probe connector firmly, and connect the second probe (if you have one).
2.Using the supplied hook and loop fasteners, if needed, place each probe in an area that is within the environmental limits specified on page 19. The location must be free from direct sunlight, excessive moisture (such as dew), dust, chlorine gas, and insecticides. Do not cover any of the probe’s ventilation holes.
3.Connect the supplied power adapter to the power port labeled 24VDC on the front panel of the unit.
Continued on next page
5
