American Power Conversion AP9312TH quick start manual Installation

Installation

Installing	To install the Environmental Monitoring Unit outside an
outside an	enclosure, place it on a flat surface in a protected area with
enclosure	adequate air flow and minimal dust. Do not operate the unit
	where temperature and humidity are outside the limits
	specified on page 19.
Installing in an	To install the Environmental Monitoring Unit in a NetShelter
enclosure	enclosure or other standard (EIA-310-D) 19-inch rack:
	1. Attach the rack-mount brackets (870-8213A and
	870-8183) to the unit using the four flat-head screws.

2.Insert caged nuts (provided with the enclosure) on the vertical mounting rails at the location you choose for the unit-bracket assembly in the enclosure.

3.Align the assembly’s brackets with the caged nuts in Step 2.

Continued on next page

4