American Power Conversion AP9312TH Quick Configuration, Through the Management Card Wizard

Quick Configuration

Required and	You must configure the following network settings of the
optional	Environmental Monitoring Unit before it can function on a
settings	network.
	• IP address of the unit
	• Subnet Mask
	• IP address of the Default Gateway
	No further configuration is required. The remaining properties
	of the unit have default settings. However, you may want to
	customize settings for your application. See “Managing the
	Unit” in the User’s Guide (usrguide.pdf).
Configuring	Choose the configuration method that matches your
TCP/IP settings	environment:
	• If you are using Windows 95, Window 98, or Windows
	NT, see “Through the Management Card Wizard” on
	this page.
	• If you are not using a Windows-based platform, or if
	you require direct serial configuration, see “Serially
	through the Control Console” on page 12.
	• If you are a network administrator using a computer
	connected to the local subnet, see “Over the Network by
	ARP” on page 13.
	• If you are a network administrator using BOOTP, see
	“Over the Network by BOOTP” on page 13.
	Through the Management Card Wizard. The
	Environmental Monitoring Unit contains a management card
	that provides the network interface. On a Windows 95,
	Windows 98, or Windows NT 4.0 workstation, the
	Management Card Wizard provides a quick way to configure
	all management card settings, including TCP/IP settings. To
	access the Management Card Wizard, run the program
	setup.exe on the CD-ROM supplied with the unit, and follow
	the on-screen instructions.
	Continued on next page

11