Before you Begin
Safety & grounding information
Read the following information before installing or operating your APC Power Distribution Unit (PDU):
•This PDU is intended for indoor use only.
•Do not install this PDU where excessive moisture or heat is present.
•Never install any wiring, equipment, or PDU during a lightning storm.
•Plug this PDU into a
•Use only the supplied brackets for mounting.
•Do not use an additional extension cord or adapter with the primary power cord.
•Do not work alone under hazardous conditions.
•Check that the power cord, plug, and socket are in good condition.
•To reduce the risk of electric shock when you cannot verify grounding, disconnect the PDU from the power outlet before installing or connecting equipment.
Reconnect to the power outlet only after you have made all connections.
•Pluggable equipment includes a protective earth connector which carries the leakage current from the load devices (computer equipment). Do not exceed a total leakage current of 3.5 mA.
•Do not handle any kind of metallic connector before the power has been removed.
•Use one hand, whenever possible, to connect or disconnect signal cables to avoid a possible shock from touching two surfaces with different grounds
•This unit contains no user serviceable parts. Repairs are performed only by
•Always install the equipment as shown in the User Manual.
5
