4
Connection
Connecting the | 1 Locate the | UPS | cable ( APC | part number | ). This | ||
chassis | cable should be routed from a UPS serial port to a location |
|
| ||||
| outside of the | UPS | . |
|
|
|
|
| If this cable is not routed, contact |
| APC | Customer | |||
| Support. A certified | APC | service technician must | ||||
| route this cable. Do not attempt to route the cable |
| |||||
| yourself. |
|
|
|
|
| |
2Attach the UPS cable to the To UPS port on the front panel of the chassis.
3 | Use the supplied routing clips to secure the cable to the | UPS | , | |
| if desired. |
|
|
|
4 | Attach a network cable to the | port on the Silcon |
| |
| management card. |
|
|
|
5Verify that the chassis has power and is operating normally. See “LED descriptions” on page 5 for a description of the indications of normal operation.
Continued on next page
