I N S T A L L AT I O N

Antennas with 75-ohm Round Leads

1

Plug the antenna lead into the VHF/UHF

terminal on the bottom of the back panel.

Separate VHF and UHF Antennas

If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops).

1

Connect both antenna leads to the combiner.

2

Plug the combiner into the VHF/UHF terminal on the bottom of the rear panel.

Connecting Cable TV

To connect to a cable TV system, follow the instructions below.

Cable without a Cable Box

1

Plug the incoming cable into the VHF/UHF antenna terminal on back of the TV.

Because this TV is cable-ready,

you do not need a cable box to view unscrambled cable channels.

CHAPTER TWO: INSTALLATION 2.2

Page 15
Image 15
Samsung CL21A11MQ, CL29V10MN, CL21K5MQ Connecting Cable TV, Antennas with 75-ohm Round Leads, Separate VHF and UHF Antennas