Connect this cable to a two-way splitter | Samsung CL29V10MN

I N S T A L L AT I O N

Connecting to a Cable Box that Descrambles All Channels

1

Find the cable that is con- nected to the ANTENNA OUT terminal on your cable box.

2

Connect the other end of this cable to the VHF/UHF antenna terminal on the back of the TV.

▼ This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.)

1

Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box.

▼	This terminal might be labeled

“ANT IN”, “VHF IN” or simply, “IN”.

2

Connect this cable to a two-way splitter.

3

Connect a coaxial cable between an OUTPUT ter- minal on the splitter and the IN terminal on the cable box.

2.3 CHAPTER TWO: INSTALLATION

Image 16

Samsung CL29V10MN manual Connecting to a Cable Box that Descrambles All Channels, Connect this cable to a two-way splitter

Contents

Owner’s Instructions Risk of Electric Shock Do not Open Thank You for Choosing Samsung Example Antenna Grounding Your New TV InstallationOperation Special Features Troubleshooting List of Features Chapter One ¨ Remote Control Sensor ´ VOL , + Stand by indicatorFamiliarizing Yourself with The TV Front Panel Buttons Audio signals from VCRs, DVD players Video signals from VCRs, DVD players and similar devicesSide / Front Panel Jacks Headphone Rear Panel Jacks Video Input OptionDVD Video Input Option Audio Inputs Remote Control ´ Number buttons+100 Size Remote Control ¯ VCR Controls ˘ PIP Controls Not availablePress to rewind a tape in your VCR Press to fast forward the tape in your VCR ’ MTS Multichannel Television Stereo  VOL -, VOL +Tunes to the previous channel Displays the main on-screen menu Connecting VHF and UHF Antennas Antennas with 300-ohm Flat Twin Leads Connecting Cable TV Antennas with 75-ohm Round LeadsSeparate VHF and UHF Antennas Cable without a Cable Box Connecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsConnect this cable to a two-way splitter Connecting a VCR Unplug the cable or antenna from the back of the TV Install AT I O N Make sure the jacks you are using are underneath the number Connecting an S-VHS VCR Option Connecting a DVD Player Option Connecting a Second VCR to Record from the TV Connecting a Camcorder Installing Batteries in the Remote Control Plug & Play Feature Press the Power button on the remote controlTurning the TV On and Off Message Plug & Play is displayed If you want to reset this feature Viewing the Menus Viewing the Menus and On-Screen DisplaysViewing the Display Selecting a Menu Language Selecting the Video Signal-source Memorizing the ChannelsPress CH two times to ANT antenna Storing Channels in Memory Automatic Method Press the CH button to select Auto program Adding and Erasing Channels Manual Method Press the VOL+ or VOL- button to select Added or Erased Adjusting the Volume Changing Channels Press the VOL + button Labeling the ChannelsBe highlighted Each label has four fields See top paragraph Setting the Clock Or CH button repeat Edly until the correct hour appears Customizing the Picture Press Menu to display menu Using Automatic Picture Settings Press Menu to display the menu Customizing the Sound Using Automatic Sound Settings Press the Menu button to display the menu Setting The On/Off Melody Viewing a VCR or Camcorder Tape Press the VOL+ or VOL- button Setting Up Your Remote Control to Operate Your VCR or DVD Customizing Your Remote ControlTurn off your VCR or VCR Codes DVD Codes Setting Up Your Remote Control to Operate Your Cable Box Cable Box Codes Fine Tuning Channels Press the VOL+ and VOL- buttons to adjust the fine tuning Changing the Screen Size Digital Noise Reduction Tilt Only CL29K5MQ Press the CH button to select Tilt Using the Surf Feature Setting the On/Off Timer Setting the Sleep Timer When finished, press the VOL + button Sound Features Choosing a Multi-Channel Sound MTS Soundtrack Extra sound settings Turbo Sound, Surround, or Auto Volume Turbo Sound Viewing Closed Captions Viewing the Demonstration Identifying Problems Chapter Five Using Your TV in Another Country Cleaning and Maintaining Your TVSpecifications