I N S T A L L AT I O N
Connecting an S-VHS VCR (Option)
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR. (This connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow steps 1–3 in the previous section to connect the antenna or cable to your VCR and your TV.
2
Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the 2 AUDIO INPUT jacks on the TV.
Make sure the jacks you are using are underneath the number “2”.
3
Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the S-VIDEO INPUT jack on the TV.
An S-video cable is usually included with an S-VHS VCR. (If not, check your local electronics store.)
CHAPTER TWO: INSTALLATION 2.6
