Samsung CL21A11MQ manual Memorizing the Channels, Selecting the Video Signal-source, ANT antenna

O P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable channels. After the available channels are memorized, use the CH ▲ and CH ▼ buttons to scan through the channels. This eliminates the need to change chan- nels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna or a cable system).

1

Press MENU to display the menu.

Press CH ▼ two times to

select “Channel”, then	Labeling	: ----
press the VOL + button.

2

Repeatedly press VOL + to cycle through these choices:

ANT (antenna),

STD, HRC or IRC (all cable		: ----
	Labeling
TV).

Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.

At this point the signal source has been selected. Proceed to “Storing Channels in Memory” (next page).

3

Press MENU twice to exit.

CHAPTER THREE: TV OPERATION 3.5