American Power Conversion MX28B1200, MX28B2400+27V manual Conv Fail Safem+

Rev 1	MX28B-1200+27V PRODUCT MANUAL
(Table 6-1. Parameter Locations, Descriptions, and Default Values)
PARAMETER	DESCRIPTION	DISPLAY SCREENS /
		DEFAULT SETTINGS
Standby Alarm {1}	This alarm indicates that the control unit is holding a rectifier	Rect Stdby Almm+
[MODULES/RECT/SET-ALM]	in the standby mode.	n of N
Fan Fail Alarm {1}	This alarm indicates that a rectifier fan has failed.	Rect FF Alm	m+
[MODULES/RECT/SET-ALM]		n of N
RFA Alarm {1}	This alarm indicates that a rectifier output has failed.	Rect RFA Alm	m+
[MODULES/RECT/SET-ALM]		n of N
CONVERTER SETUP
Fail Safe Voltage {1}	Converter default output voltage if communication with the	Conv Fail Safem+
[MODULES/CONV/PARAM]	control unit fails.	-50.00 V
Communications Timeout {1}	T he maximum converter communications response time	Conv Fail Commm+
[MODULES/CONV/PARAM]	allowed before a communications failure is declared.	1 min
Converter Information	NOTE: This information can be viewed for each
	converter installed by using the horizontal arrow keys.
Converter Current	A display of the DC output current for the individual	Conv 1 Curr	#
[MODULES/CONV/INFO]	Converter.	7.9 A
Current Limit Alarm	The status will be “ON” if the Converter has been forced into	Conv 1 CL	#
[MODULES/CONV/INFO]	its current limited mode.	OFF
Standby Alarm	The status will be “ON” if the control unit is holding the	Conv 1 Stdby	#
[MODULES/CONV/INFO]	Converter in the standby mode.	OFF
Fan Fail Alarm	The status will be “ON” if the Converter fan has failed.	Conv 1 FF	#
[MODULES/CONV/INFO]		OFF
Converter Fault Alarm (CFA)	The status will be on if the Converter output has failed.	Conv 1 CFA	#
[MODULES/CONV/INFO]		OFF
Converter Alarms
Current Limit Alarm {1}	This alarm indicates that a converter has been forced into the	Conv CL Alm	m+
[MODULES/CONV/SET-ALM]	current limited mode.	n of N
Standby Alarm {1}	This alarm indicates that either the control unit is holding a	Conv Stdby Almm+
[MODULES/CON/SET-ALM]	converter in the standby mode or an operator has set a	n of N
	converter to standby
Fan Fail Alarm {1}	This alarm indicates that a converter fan has failed.	Conv FF Alm	m+
[MODULES/CON/SET-ALM]		n of N
CFA Alarm {1}	This alarm indicates that a converter output has failed.	Conv CFA Alm	m+
[MODULES/CON/SET-ALM]		n of N
CIRCUIT BREAKER SETUP
Breaker 1 Alias {1}	An alternate name (alias) that can be assigned to a circuit	Cir Bkr 1	m+
[MODULES/CIRBKR/ALIAS]	breaker if desired.	+24V
•	•	•
•	•	•

39