American Standard installation instructions Speed Connect Drain, Installation, Instructions

	Installation
COLONY SOFT	Instructions
	2175.503

Single Control Lavatory Faucet with Speed Connect™ Drain

Congratulations on purchasing your American Standard faucet with the Speed Connect drain, a feature found only on American Standard faucets.

Speed Connect Drain*

•1/3 of the parts, installs in 1/3 of the time

•No tools needed

•Never needs adjustment

•Guaranteed to seal properly the first time, every time.

Certified to comply with ANSI A112.18.1

M968882 Rev. 1 . 3

*Your new American Standard faucet is designed to work only with the Speed Connect drain.

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

Recommended tools

	Screwdriver	Channel Locks		Adjustable Wrench	Plumbers' Putty or Caulking	Tubing Cutter
1			Turn off hot and cold water
	INSTALL FAUCET	CAUTION
			supplies before beginning.

Apply a bead of putty along the edge of the underside of the FAUCET (1).

Insert FAUCET (1) and CABLE CONNECTOR (2) through center hole of mounting surface. Fig. A.

From under side of mounting surface thread the two MOUNTING

NUTS (2) onto FAUCET SHANKS (4). Fig. B.1

Center FAUCET (1) and hand tighten MOUNTING NUTS (3) to secure FAUCET (1).

PUTTY

3

(HAND TIGHTEN)

Fig. B. 4

Fig. A.

3

2

1