American Standard 2555.602 Install Diverter, Install Trim, Adjust HOT Limit Stop

2 INSTALL DIVERTER

When finished tiling the wall, remove PLASTER GUARD (1). Remove two screws that secure the DIVERTER LID (2) and

remove Lid. Inspect the inside surface of diverter port.2 Diverter port must be free of any dirt. Clean if necessary.

Install DIVERTER (3) with SCREWS (4) removed from

DIVERTER LID (2).

Operate DIVERTER (3). DIVERTER (3) should slide in and out smoothly.

Push on DIVERTER COVER (5).

DIVERTER PORT

3 INSTALL TRIM

Push CAP (1) over VALVE CARTRIDGE (2).

Mount ESCUTCHEON (3) and gasket to valve body with SCREWS (4).

Remove PIPE CAPS (5) from shower pipe and tub filler pipe.

Install SHOWER ARM (6) and SHOWER HEAD (7).

Install TUB FILLER SPOUT (8).

CAUTION: Protect finish on SHOWER ARM, SHOWER HEAD and TUB SPOUT when installing.

7

6

3

4

5

1

4 ADJUST HOT LIMIT STOP

By restricting HANDLE rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP (1) reduces risk of accidentalscalding. To set the maximum hot water temperature of your faucet, all you need to do

is adjust the setting on the HOT LIMIT SAFETY STOP (1).

Turn CARTRIDGE STEM (2) to the OFF position (coldest setting) before making adjustment to HOT LIMIT STOP (1). Use a flat blade screwdriver to pry free the HOT LIMIT SAFETY STOP (1). Pull forward and rotate counterclockwise one number to limit hot water temperature. Use ARROW (3) on CARTRIDGE (4) and NUMBERS (5) on HOT LIMIT STOP (1) for indication.

5

1

3

2

4

8 5

						3
		579
	3		11	3								5
1					51
0
					1
												1
												4
												3
		2
												1
												5
												1
												3
											1	1
										9
									7
								5
							3
						1
				4		COLDER

(Larger Numbers)

0 1 3 5 7 9 11 13 15

2

HOTTER

(Smaller Numbers)

0 1 3 5 7 9 11 13 15

5

					1
					5
					1
					3
					1
				9	1
			7
		5
	3
1					1

M968789 Rev. 1 . 2