VANITY INSTALLATION
1
Assemble vanity as per instructions.
4
Mounting holes are provided on the rear of the lavatory so it can be secured to the wall if desired.
2 |
| 5 |
|
|
|
|
|
A
Shut-Off Valves
Mount the faucet and drain assembly (not included) on the sink following the manufacturer’s instructions. Be certain to apply a bead of sealing putty on the underside of the drain (Part “A”) in order to ensure a watertight seal between the sink and drain. Remove excess putty after installing drain on sink.
Connect supply line to faucet (finger tight) and carefully bend tubes to engage with the supply
3 |
| 6 |
|
|
|
•Place the sink on the vanity to check for alignment and clearance.
•The sink should be centered left to right on the vanity with the front edge of the sink even with the front of the vanity.
•Secure sink to furniture as per vanity instructions.
C
B
Connect trap to drain assembly hand tight to check alignment. It may be necessary to cut off part of the tailpiece (area “B”) or part of the horizontal leg of the trap (area “C”). Secure joints for watertight assembly.
REPAIR PART NO.
DESCRIPTION
CHROME OVERFLOW CAP
2 | |
|
