2 POP-UP DRAIN
Remove CLEAR PLASTIC COVER (1).
Remove CARDBOARD SPACER (2) from under DRAIN
Tighten TAILPIECE (4) on DRAIN BODY before installing DRAIN BODY. Fig. B.
Fig. A.
1
3
2
Fig. B.
DRAIN
BODY
4
3 REMOVE FLANGE
Thread FLANGE (1)
Thread LOCKNUT (3)
Fig. A.
1
2
Fig. B.
4
3
4 | INSTALL DRAIN FROM |
BELOW FIXTURE |
From under side of SINK install DRAIN BODY (1) up through drain outlet.
REAROF SINK
4
5 TIGHTEN LOCKNUT
Tighten LOCKNUT (1) firmly with Adjustable Wrench or Channel Locks.
Note: No plumber’s putty or caulk is required.
The CABLE ATTACHMENT POINT (2) must face towards the rear of the SINK.
3
DRAIN OUTLET
Install FOAM GASKET (3) and FLANGE (4) onto drain body from above SINK and tighten FLANGE (4) firmly.
1 |
2 |
1
6 FLANGE GASKET AND POP-UP KNOB
Check DRAIN FLANGE in SINK to ensure that WHITE FOAM GASKET (3) is fully compressed and not visible. Fig. A.
Fig. A. |
|
WHITE FOAM |
|
GASKET | DRAIN |
NOT VISIBLE | FLANGE |
2 |
|
Fig. B. DOWN
1
M 9 6 8 8 8 9 Rev. 1 . 2