2.3Parameter Setting Mode
To enter the parameter setting mode, perform the following operations. Refer to the parameter tree, page 8 for 1.90 settings.
∙Press [ON LINE] to toggle to
∙Press [MODE/MENU] to enter the parameter setting mode.
∙The following keys are provided for the parameter setting operations.
[MODE/MENU]
§Enters parameter setting mode.
§Returns to the branch menu from data setting mode.
§Returns to
[ENTER] | to save as new defaults |
[ENTER] | to exit without saving |
[ENTER] | to restore factory default |
[ENTER] | to restore previous default |
[ / ]
§Moves among the top of the branch mode when the display shows branch mode titles listed here.
- | Print parameters | - | I/O configuration |
- | Label parameters | - | System parameters |
-Time set
§Selects data in each parameter when the display shows the parameter name.
[é/ê]
§Moves among the parameters in each branch mode.
[ n ]
§Numeric keys have two functions : one numeric in the first input activates key entry for data change, two or three digit numerics following previous input is data to be changed.
[ENTER/PRINT]
§Pushed input data into the buffer after this key is depressed to select or input data. At this moment, this key just lets the printer know which data is input and the printer does not store new data yet.
§Decides on the selection when the display asks next action.
§Stores data into the memory when this key is depressed following to data input.
∙Date and time should be set ON.
4
