Table of Contents
1.0 |
| GENERAL INFORMATION | 1 |
1.1 | Features | 1 | |
1.2 | 5106 Overall Dimensions | 2 | |
1.3 | Ribbon Specifications | 2 | |
2.0 |
| INITIAL SETUP | 3 |
2.1 Assembly and Setup Procedure | 3 | ||
2.2 Selection of Media Output Mode | 3 | ||
2.3 | Parameter Setting Mode | 4 | |
2.4 Parameter Tree Version 1.90 | 5 | ||
3.0 | LOADING INK RIBBON AND LABEL ROLL | 6 | |
4.0 |
| ADJUSTMENTS | 8 |
4.1 | Thermal Head Replacement | 8 | |
4.2 Changing the Direction of the | 9 | ||
4.3 | Thermal Head Positioning | 10 | |
5.0 | MECHANICAL ADJUSTMENTS TO THE THERMAL HEAD | 11 | |
6.0 |
| RIBBON | 17 |
6.1 | Ribbon Adjustment | 17 | |
6.2 | Running Condition | 19 | |
7.0 |
| SENSORS | 21 |
8.0 |
| SENSITIVITY ADJUSTMENT | 22 |
9.0 |
| ELECTRICAL CIRCUITRY | 24 |
10.0 EXTERNAL CONNECTOR AND PIN ASSIGNMENTS | 25 | ||
11.0 VOLTAGE CHECK AND ADJUSTMENT | 26 | ||
12.0 |
| MAIN PCB BOARD | 27 |
13.0 |
| 28 | |
Table of Figures |
| ||
Figure 1. Overall Dimensions | 2 | ||
Figure 2. Ribbon Dimensions | 2 | ||
Figure 3: Loading Ribbon and Label Roll | 6 | ||
Figure 4. Thermal Head Replacement | 8 | ||
Figure 5. Thermal Head Block | 10 | ||
Figure 6. Mechanical Adjustment | 11 | ||
Figure 7. Hinge of Thermal Head Lever | 12 | ||
Figure 8. Thermal Head Alignment | 13 | ||
Figure 9. Thermal Head Positioning | 14 | ||
Figure 10. Head Positioning | 15 | ||
Figure 11. Incline Checking of the Thermal Head | 16 | ||
Figure 12. Ribbon Running Condition | 18 | ||
Figure 13. Wrinkle On Ribbon | 19 | ||
Figure 14. Ribbon Application Adjustment | 20 | ||
Figure 15. Location of Sensors and Switch | 21 | ||
