AMT Datasouth 5106 manual Voltage Check and Adjustment, Usage and Adjusted By

11.0 VOLTAGE CHECK AND ADJUSTMENT

Check Terminal		Switch Setting and		Usage and Adjusted By
		Typ. Voltage
V1	W	H:20.0 +/- 0.5		For Take-Up Motor
		L: 18.0	+/- 0.5	By VR1 on Motor Control
				Board (TPB-2177)
V2	R	H: 20.0	+/- 0.5	For Ribbon Motor
		L: 17.6	+/- 0.5	By VR2 on Motor Control
				Board (TPB-2177)
NOTES:

W switch for Take-Up Motor has to be set to ‘H’ side whenever Presentation Mode is selected. In other modes, W switch should be set to ‘L’ side.

R switch for Ribbon Motor is set to ‘L’ as usual.

26