AMX Mio Attach Sending Firmware to The Mio Attach

Programming The Attaché

12 Mio Attaché Remote Keypad Device

Sending Firmware to The Mio Attaché

You need NetLinx studio to update firmware located on the Mio Attaché. To send firmware to the device:

1. Open NetLinx Studio.

2. Go to Tools > Firmware Transfers > Send to Axcess Device... This opens the Send to Axcess Dialog

Window .

3. Browse to the location of the firmware file.

4. Select the file within the Files frame.

5. Click Query for Devices.

6. Select the Mio Attaché within the Devices frame.

7. Click Send and then Close.

8. Upon confirmation of a successful send, you can exit NetLinx Studio.

FIG. 5 Send to Axcess Dialog Window

Contents

Main AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Page Overview Mio Attach Specifications The specifications for the Mio Attach are as follows: Mio Attach (FG5799-01) Specifications The Mio Attach Wake Up State Mio Attach Docking Station Specifications Page Installation Installing The Battery 1. 2. 3. Charging The Attach with the Provided Power Supply Charging The Attach with the Docking Station 1. 2. 3. 4. Low Battery Indicator Changing Buttons Page Programming The Attach KeypadBuilder Using Connector Ports on The Attach 1. 2. Setting The IR Frequency 1. 2. 3. Persistent Serial Commands Serial Commands (Cont.) Sending Firmware to The Mio Attach