Anthem Audio D2 DVI connection:, 1.8INTERCONNECTS, not covered under warranty, especially when using a long cable, Important notes regarding HDMI cables:

1. INTRODUCTION continued …

1.8INTERCONNECTS

These illustrations show audio, video, IR, and trigger connectors used between source components, the processor, displays, and power amplifiers. Note that when RCA cables have coaxial construction and their impedance is 75 ohms, they are equally suitable for analog video and digital audio.

RCA Black or		RCA Red	RCA Yellow	HDMI	Mini DIN
	White

Analog Left	Analog Right	Digital Audio or
Channel	Channel	Composite Video
RCA Green:	RCA Blue:	RCA Red:	Digital Video		S-Video
Component Y	Component Pb	Component Pr	and Audio
1/4” Stereo	3.5mm	Optical	XLR Female	XLR Male
	Mini (Mono)		(connects to output)	(connects to input)

12V Trigger

HeadphoneDigital Audio Analog Balanced or AES/EBU IR Emitter

DVI connection:

Cables with DVI connection on one end and HDMI connection on the other are more reliable than DVI-HDMI adapters. If you are having a connection problem and an adapter is in use, try eliminating the adapter.

Important notes regarding HDMI cables:

1080p uses twice the bandwidth that 720p and 1080i do – make sure that the cable is suitable for your application especially when using a long cable otherwise the picture may contain pixel dropouts or not play at all. If the display is far from the processor, a repeater or special connection system may be needed – contact your dealer.

BE CAREFUL WHEN INSERTING HDMI CABLES. The connector should slide into the jack easily – do not insert it on an angle and do not force it. Each connector contains 19 delicate pins, and cables with damaged pins can damage jacks. This type of damage is not covered under warranty. If your HDMI cables have been connected so many times that they are about to wear out, we strongly recommend that you replace them.

7