3. SETUP continued …

Letterbox:

When the source material’s aspect ratio (the proportion of image width to height) does not match the display’s aspect ratio and you want to preserve the original image’s proportions, the unused areas of the screen will be blank. You can select the shade of these areas from ten levels between light gray and black. If you do not want letterbox (bars on top/bottom) or pillarbox (sidebars) on your screen, see section 4.11.

Synchronization:

Try Inverted setting if the image via HDMI is not centered or does not show.

Component 2 Out:

The second Component video output can be configured in one of the following three ways or turned Off:

•MAIN output, processed (same signal as Component 1).

•MAIN output, passthrough – this bypasses the video processing and on-screen display is not available. If a secondary display in the main room does not accept the format being fed to the main display, use this setting.

•ZONE2 output – bypasses video processing and on-screen display not available.

20