3.SETUP continued …

Example 1: Select a source for the ZONE2 Timer:

•Enter the setup menu. Go to SET TIME / TIMERS and press SELECT.

•Press the ￿ button until you reach SET ZONE2 TIMERS.

•Press SELECT. The SET ZONE2 TIMERS submenu will appear.

•Press the ￿ button until you reach SOURCE.

•Use the ￿￿buttons to change to desired source.

•Press BACK to leave this submenu and return to the SET TIME/TIMERS menu.

To have the Timer turn on to a Preset Station, do the following from the SOURCE menu line: (setting Preset Stations is explained in section 4.4.1)

•Use the ￿￿buttons to change to “Last Stn”.

•Press SELECT to highlight “Last Stn”.

•Use the ￿￿ buttons to select an FM•AM Preset. These scroll from AM 1-1 to AM 1-6 then from FM1-1 to FM3-6 and back to “Last Stn”.

•Press BACK once you have selected a preset.

The Timer submenu setup procedure is the same for MAIN, ZONE2, and ZONE3.

Example 2: Change ZONE2, TIMER2 to come on Weekdays at 7:30 AM.

•Enter the setup menu. Go to SET TIME/TIMERS and press SELECT.

•Press the ￿ button until you reach SET ZONE2 TIMERS.

•Press SELECT. The SET ZONE2 TIMERS submenu will appear.

•Press the ￿ button to reach TIMER 2.

•Use the ￿￿buttons to change to “Week”.

•Press the ￿ button until you reach WEEKDAY ON.

•Press SELECT. The hour is now highlighted. Use the Master Control Knob or the ￿￿ buttons to set the hour to “7” AM. (Continuing through “12” will advance the AM/PM settings.)

•Press the ￿ button. “00” minutes will be highlighted.

•Use the Master Control Knob or the ￿￿ buttons to set the minutes to “30”.

•Press BACK to leave this submenu and return to SET TIME/TIMERS menu.

When scrolling between 11 PM and 12 AM settings, the display shows “--:--”. Timers set in the “--:--”

position will be skipped. For example, to set the Timer to only turn on, set the Off time to “--:--”. To set

the Timer to only turn off, set the On time to “--:--”.

23