3. SETUP continued …

SETTING UP THE PROCESSOR

Upon entering the setup menu your display will show the menu below. Only 8 menu items can be displayed at once – for clarity this manual shows each menu with all its items. On-screen display is recommended although the front panel shows similar information, one item at a time. If the default video output settings do not work with your display, use the front panel display to set video output.

On-screen display is available from the following video outputs:

MAIN – HDMI, Component (processed) and S-Video

ZONE2 – S-Video

 

 

1.

STATEMENT D2 SETUP

VIDEO OUTPUT

2.

SET TIME / TIMERS

3.

SPEAKER CONFIG

4.

LISTENER POSITION

5.

LEVEL CALIBRATION

6.

SOURCE SETUP

7.

SOURCE PRESETS

8.

ANALOG INPUT LEVELS

9.

ADC / AUDIO OUTPUT

10.

VOLUMES / PATH NAMES

11.

TRIGGER / IR / RS232

12.

DISPLAYS / TIMEOUT

13.

SAVE / LOAD SETTINGS

14.

LOCKOUT / PASSWORDS

SELECT Enters Submenu

To go to a submenu, highlight a menu item and press SELECT. Each on-screen menu also has a scrolling help line at the bottom as shown above.

3.1VIDEO OUTPUT

Highlighting VIDEO OUTPUT then pressing SELECT displays this menu:

1. VIDEO OUTPUT

a. VIDEO OUT CONFIG 1 b. VIDEO OUT CONFIG 2 c. VIDEO OUT CONFIG 3 d. VIDEO OUT CONFIG 4

16