￿Do not place the TV where the power cord is subject to wear or abuse.

￿Do not pinch, bend, or twist the cord excessively. The core lines may be bared and cut, causing a short- circuit, and resulting in a fire or an electric shock.

￿Do not convert or damage the power cord.

￿Do not allow anything to rest on or roll over the power cord.

￿Do not move the TV with the power cord plugged in.

￿Keep the power cord away from heat sources.

￿To unplug power cord, disconnect it from the wall outlet first.

￿Be sure to grasp the plug when disconnecting the power cord.

￿Do not pull the power cord.

￿Do not use the supplied AC power cord on any other equipment.

￿Use only an original AOC AC power cord, not other brands.

Broken Pieces

Do not throw anything at the TV. The screen glass may break by the impact and cause serious injury.

If the surface of the TV cracks, do not touch it until you have unplugged the AC power cord. Otherwise electric shock may result.

Handling of broken glass and liquid crystal leakage

If the LCD panel gets damaged, crystalline liquid leakage may occur, or scattered broken glass may result. Do not touch broken glass or crystalline liquid which is toxic, with bare hands as cuts, poisoning or skin irritation may occur. Also, do not let glass fragments or leaked crystalline liquid get into your eyes or mouth. Should either contact your eyes or mouth, rinse the contacted area thoroughly with water and consult your doctor.

LCD Screen

￿Although the LCD screen is made with high-precision technology and has effective pixels of 99.99% or more, black dots or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This is a structural property of the LCD panel and is not a malfunction.

￿The LCD screen is made with high-precision technology and to achieve a high level of performance and picture quality, this TV’s backlight setting is set to maximize the brightness of the TV. However, uneven brightness may be observed when the LCD TV is viewed in a dark ambient without an input source or a blank screen. This condition is normal and not a malfunction of the TV. Changing the Picture mode, Backlight setting, enabling the Light Sensor, or turning on the Power management will improve this condition.

￿Do not expose the LCD screen surface to direct sunlight. Doing so may damage the LCD panel.

￿Do not push or scratch the LCD screen, or place objects on top of the TV. The image may be uneven or the LCD panel may be damaged.

￿If the TV is used in a cold place, a smear may occur in the picture or the picture may become dark. This does not indicate a failure. These phenomena improve as the temperature rises.

￿Ghosting may occur when still pictures are displayed continuously. It should disappear after a few moments.

￿The screen and cabinet get warm when the TV is in use. This is not a malfunction.

￿Avoid spraying insect repellent with volatile material on the screen.

￿Avoid prolonged contact with rubber or plastic material.

Wiring

When connecting cables, be sure to unplug the AC power cord for your safety. Take care not to catch your feet on the cables. It may damage the TV set.

Electric Shock

Do not touch the AC power cord or the TV with a wet hand. If you plug/unplug the AC power cord from the TV with a wet hand, it may cause electric shock.

5

Page 6
Image 6
AOC L22DK99U L26DK99U L32DK99U manual LCD Screen, Wiring, Electric Shock, Broken Pieces