Manuals / APC / Computer Equipment / Computer Accessories

APC 1000XL, 120VAC, 750XL, 1500VA Power management software and interface kits can be used, by APC

Models: 750XL 230VAC SUA1500X93 1500VA 1000XL 120VAC

1 18

Page 5

Power management software and interface kits can be used

BASIC CONNECTORS
Serial Port	USB Port	Power management software and interface kits can be used
		with the UPS. Use only interface kits supplied or approved

by APC.

Use the APC supplied cable to connect to the Serial Port. DO NOT use a standard serial interface cable since it is incompatible with the UPS connector.

Both Serial and USB Ports are provided. They cannot be used simultaneously.

External Battery Pack Connector

TVSS Screw

XL models: Use the battery pack connector to connect optional external battery pack(s). These units support up to ten external battery packs.

See the APC web site, www.apc.com/support for the correct external battery pack model number for your UPS.

The UPS features a transient voltage surge-suppression (TVSS) screw for connecting the ground lead on surge suppression devices such as tele- phone and network line protectors.

When connecting grounding cable, disconnect the unit from the utility power outlet.

Page 5

Image 5

APC 1000XL, 120VAC, 750XL, SUA1500X93, 1500VA, 230VAC Power management software and interface kits can be used, by APC

Contents

APC Smart-UPS Uninterruptible Power SupplyUser’s Manual 1000VA/1500VA 230VAC/120VAC/100VAC 750XL/1000XL 230VAC/120VAC TowerPage Introduction 1 INSTALLATIONUnpacking Positioning the UPS230V M ODELS Connecting Equipment and Power to the UPS1. Plug in the battery connector by APC Power management software and interface kits can be usedwith the UPS. Use only interface kits supplied or approved Power On Power Off 2 OPERATIONBattery Charge LoadAutomatic Self-Test Manual Self-Test On Battery OperationAVR Boost On Battery Overload Replace Battery Battery Disconnected 3 USER CONFIGURABLE ITEMS Low Battery Warning 4 STORAGE, MAINTENANCE, AND TRANSPORTING Replacing the Battery ModuleBe careful during the following steps-the battery module is heavy StorageStep Disconnect the battery connectorStep The battery may remain in the UPS it does not have to be removed Disconnecting the Battery for TransportUPS WILL NOT TURN OFF 5 TROUBLESHOOTINGTHE SITE WIRING FAULT LED IS LIT THE OVERLOAD LED IS LIT AND THE UPS EMITS A SUSTAINED ALARM TONE120V models only THE INPUT CIRCUIT BREAKER TRIPSUtility Voltage Contacting APC ServiceThe battery may remain in the UPS it does not have to be removed Regulatory Agency Approvals and Radio Frequency Warnings 6 REGULATORY AND WARRANTY INFORMATION230V MODELS 120V MODELSDeclaration of Conformity Limited Warranty