APC SUA1500X93, 120VAC, 750XL, 1500VA, 230VAC, 1000XL user manual User Configurable Items

3:USER CONFIGURABLE ITEMS

NOTE: SETTINGS ARE MADE THROUGH SUPPLIED POWERCHUTE SOFTWARE OR OPTIONAL SMART SLOT

ACCESSORY CARDS.

FUNCTION	FACTORY	USER SELECTABLE CHOICES		DESCRIPTION
	DEFAULT
Automatic Self-Test	Every 14 days	Every 7 days		This function sets the inter-
	(336 hours)	(168 hours),		val at which the UPS will
		On Startup Only, No Self-		execute a self-test. Refer to
		Test		your software manual for
				details.
UPS ID	UPS_IDEN	Up to eight characters to		Use this field to uniquely
		define the UPS		identify the UPS, (ie. server
				name or location) for net-
				work management purposes.
Date of Last Battery Re-	Manufacture	Date of Battery Replacement		Reset this date when you
placement	Date	mm/dd/yy		replace the battery module.
Minimum Capacity Be-	0 percent	15, 30, 45, 50, 60, 75, 90		The UPS will charge its
fore Return from Shut-		percent		batteries to the specified
down				percentage before return
				from a shutdown.
Voltage Sensitivity		Brightly lit: UPS is set to		To change the UPS sensitiv-
The UPS detects and		high sensitivity (default).		ity, press the voltage sensi-
				tivity button	(rear panel).
reacts to line voltage		Dimly lit:	UPS is set to
				Use a pointed object (such as
distortions by transferring		medium sensitivity.
				a pen) to do so.
to battery operation to		Off:	Low battery
protect the connected				You can change the sensitiv-
equipment. Where power		warning interval is about		ity level through Power-
quality is poor, the UPS		eight minutes.		Chute software.
may frequently transfer to
battery operation. If the
connected equipment can
operate normally under
such conditions, reduce
the sensitivity setting to
conserve battery capacity
and service life.
Alarm Control	Enable	Mute, Disable		User can mute an ongoing
				alarm or disable all existing
				alarms permanently.
Shutdown Delay	90 seconds	0, 180, 270, 360, 450, 540,		Sets the interval between the
		630 seconds		time when the UPS receives
				a shutdown command and
				actual shutdown.
		6