Installation
6 NetworkAIR Rack Air Removal Unit Installation
Install the fan frame
1. With the exhaust vent at the top of the fan frame,
align the four corners of the fan frame to the four
corners of the enclosure. The spring-loaded pins at
the bottom of the fan frame will line up with the
hinge-pin brackets on the enclosure.
2. Insert the spring-loaded pins at the bottom of the
fan frame into the holes.
3. Pull the spring-loaded pins at the top of the fan
frame and release the pins into the holes.
Warn
i
ng
To avoid personal injury or damage to the enclosure, one person should support
the fan frame while another places the fan frame onto the enclosure.
Warn
i
ng
Install the Rack Air Removal Unit only on racks that are loaded with equipment
or are counter-weighted to avoid tipping of the rack.