Display Interface
|
|
|
| FAN |
|
|
|
|
|
| |
|
|
|
|
| |
|
|
|
|
|
|
| COOL |
|
| ||
SLEEP |
| °C | LOW MED HIGH | ON DRY | |
|
| °F |
| OFF | |
| SET TEMP | AUTO | SET TIME | ||
na3360a
Display Screen Information
Item | Function | Description |
1 | Sleep mode indicator | Sleep mode is an undercooling mode that is used during times of non- |
|
| peak heat. Sleep mode is activated by setting the timer. The set |
|
| temperature will automatically increase at intervals until the timer turns |
|
| off the Sleep mode. |
2 | Cool mode indicator | Cool mode cools the room. Temperature and fan speed are set by the user. |
3 | Fan mode indicator | Fan mode moves air only. The fan speed is set by the user. |
4 | Dry mode indicator | Dry mode dehumidifies the room. The fan speed is Low only. |
5 | Set Time | Displays the timer interval (0.5 to 24 hours) and if the timer is on or off. |
6 | Fan Speed indicator | Bars labeled Low, Medium and High indicate fan speed. |
7 | Auto mode indicator | In auto mode the microprocessor chooses fan, cool or dry mode |
|
| depending on the set temperature setting. |
8 | Set Temp | Displays the set temperature. |
InRoom SC 60 Hz User Manual | 15 |
