Management Card and MasterSwitch Events
Event generation The Management Card and MasterSwitch both generate events, which are logged in the event log.
Any event of either type generates a unique code, which you can use in applications to identify the event.
To use SNMP traps for event notifications, you must first identify the trap receivers (up to four) by their specific IP addresses. See Trap receivers on page 30.
Severity levels defined
Severity | Definition | |
|
| |
| Requires immediate action. Severe events can cause incorrect | |
Severe | operation of the DC Power Plant or its supported equipment or can | |
| cause loss of power protection during a power failure. | |
|
| |
Warning | Needs action if the condition worsens, but does not require | |
immediate attention. | ||
| ||
|
| |
Informational | Requires no action. | |
|
|
Note: All MasterSwitch events and some Management Card events have a severity level.
For information about how severity levels define the actions associated with events, see Actions Option (Web Interface only) on page 29.
Continued on next page
MasterSwitch Power Distribution Unit User’s Guide | 36 |