Actions Option (Web Interface only)
Enabling and disabling event actions
Use the Actions option of the Events menu to enable or disable the following for events that have a specified severity level:
•Events Log
•SNMP Traps
| Some Management Card (system) events do not have a severity level, |
| and you cannot disable actions for those events. |
Severity levels of | All MasterSwitch events and some Management Card events have a |
events | default severity level of Severe, Warning, or Informational. See Severity |
| levels defined on page 36. |
| To use an evntlist.htm page to change the default severity level of an |
| event, see How to Configure Individual Events on page 33. |
Event Log action | Disable this action to prevent the logging of all events that have a |
| severity level. By default, all events are logged. |
SNMP Traps action | By default, the SNMP Traps action is enabled for all MasterSwitch |
| events and for Management Card events that have a severity level |
| (informational, warning, or severe). |
| To use SNMP traps for event notifications, you must first identify the trap |
| receivers (up to four) by their specific IP addresses. See Trap receivers |
| on page 30. |
Email action | By default, the Email action is enabled for severe events only. To use |
| |
| See page 31. |
Related topics | See Event Log on page 27. |
| See Management card events on page 37 and MasterSwitch events on |
| page 38 for a description and the default severity level (if any) for each |
| event. |
MasterSwitch Power Distribution Unit User’s Guide | 29 |