CommandReference
ASCII ESC d
Decimal 27100
Hex 1B64
Parameters
None
ESC E Form Feed
Description
Prints the contents of the text buffer and advances the print media. The di stance the
media will advance dep ends on two factors: the feed distanc e specified by the GS L
command and the p resence of a punch h ole. The LabelWriter p rinter will advan ce until
a punch hole is detect ed or until the feed distance (specified by the GS L command)
has been reached.
When the printer is p owered on, the feed dista nce stored in flash memory is used as th e
default distance; the factory default i s7 .5i nches. A new feed distance specified by the
GS L command will override the flash memory sett ing until the printer is eit her
powered down or a reset command is issued (by the ESC @ or ESC * command).
The FF and ESC Ec ommands aret he same and produce the same result.
See Also
FF
Expression
ASCII ESC E
Decimal 2769
Hex 1B 45
Parameters
None
ESC e Set Print Temperature to Default
Used to adjust the prin ting strobe.
This command is also sup ported by the LabelWriter SE300 and t he LabelWriter 400 and
450 series printers.
Expression
ASCII ESC e
Decimal 27101
Hex 1B 65
Parameters
22