Command Reference | Epson SE450 manual

Command Reference

When using the caret feature, three-digit characters must always follow the caret (^). Also, while the caret feature is enabled, the printer will not work correctly with the LabelWriter Windows or Mac raster print drivers.

54

Image 60

Epson SE450 manual Command Reference

Contents

Technical Reference Copyright Contents Page Character Codes Configuration Menu Printer Specifications This page intentionally left blank for double-sided printing Introduction This page intentionally left blank for double-sided printing Configuring the Host Computer for RS-232 Serial Interface RS-232 Settings RS-232 Signal Levels RS-232 Cabling Programming Overview Programming the LabelWriter Printer Resetting the Printer Command ParametersCharacter Evaluation Bit Character Parameters Conversions Font Specifications ObjectsPrint Modes Raster Mode Orientation Landscape Mode Text Objects Barcode Objects Graphic Objects Line Objects Command Reference Alphabetical Command List ESC L Commands by Function Position Control Font Control GS DC2 GS DC3 GS RS GS US Barcodes MiscellaneousPrintable Characters Commands Raster Compatibility20h FFh Printable Characters DC4 Cancel Double Wide Mode CR Carriage Return ESC a Return Printer Status ESC a Return Hardware StatusESC B Set Dot Tab ESC c Set Print Temperature to Low ESC d Set Print Temperature to MediumESC D Set Bytes per Line ESC e Set Print Temperature to Default ESC E Form Feed ESC g Set Print Temperature to High ESC F 1 n Feed n LinesESC h Set Print Speed to Fast ESC i Set Printing Speed to Barcode ESC L Set Feed Length ESC M Set Font to 12 cpi ESC P Set Font to 16 cpi ESC Q Set Top Margin ESC S Set Font to 20 cpiESC T Set Font to 7 cpi ESC U Set Font to 10 cpi ESC V Return Firmware Revision ESC W Wrap Data ESC X Set Horizontal Starting Position ESC Y Set Vertical Starting Position ESC * Reset to Defaults ESC @ Reset to Power-up ConditionESC y Set 203 x 203 dpi ESC z Set 136 x 203 dpi ETB Raster Mode Compressed Graphics FF Form Feed GS a Starting Position of Bar Code GS DC2 Set Font to Double Height GS DC3 Cancel Double Height GS d Feed n Text Lines GS h Set Barcode Height GS k Print Barcode Data Matrix Barcode UPC-A Supported Square Data Matrix Symbol Sizes Supported Rectangular Data Matrix Symbol Sizes Commands Command Reference GS l Draw Line in Landscape Mode Least significant byte of the line length in dots GS L Set Feed Length GS RS Set Inverse Print Mode GS q Print UPC/EAN Checksum GS S Return Printer Status Returns GS T Select Line Wrap/Truncate Modes GS t Set Characters per Line in Landscape GS US Cancel Inverse Print Mode GS u Set Characters per Line in Portrait GS V Set Print Orientation GS W Set Bar Code Element Width GS ~ Enter Debug Mode GS w Set Barcode Module Width GS * Landscape Mode Graphics SO Set Font to Double Wide Mode HT Horizontal TabLF Line Feed SYN Raster Mode Graphics Caret Feature Activating the Caret FeatureUsing the Caret Feature Command Reference Character Codes Char Character Codes CharName \ back slash DEL Name Decimal Hex Binary Caret Feature Character Codes 251 1111 252 253 254 255 This page intentionally left blank for double-sided printing Configuration Menu Configuration Menu Printer Specifications Hardware SpecificationsInterface Specifications Print Head Specifications Printer Specifications USB Settings Serial Interface Specifications This page intentionally left blank for double-sided printing