Commands
ESC c Set Print Temperature to Low
Used to adjust the printing strobe.
This command is also supported by the LabelWriter SE300 and the LabelWriter 400 and 450 series printers.
Expression
ASCII | ESC c |
Decimal | 27 99 |
Hex | 1B 63 |
Paramenters
None
ESC D Set Bytes per Line
Description
Provided for LabelWriter printer raster compatibility.
This command defines the number of bytes in a single line of raster bitmap data. The LabelWriter SE450 printer prints up to 56 bytes (448 dots) of bitmap data. Use of this command, along with the ESC B command, can drastically reduce the number of data bytes required to skip blank areas.
See Also
ESC B
SYN
ETB
Expression
ASCII | ESC D n1 |
Decimal | 27 68 n1 |
Hex | 1B 44 n1 |
Parameters
n1 number of bytes per line (default = the allowed maximum, 56 bytes)
ESC d Set Print Temperature to Medium
Used to adjust the printing strobe.
This command is also supported by the LabelWriter SE300 and the LabelWriter 400 and 450 series printers.
Expression
21
