Command Reference
This chapter describes th e commands you can use to program your Lab elWriter SE450
printer. Below are some of the things you can do with the co mmands:
nSend line feeds and carriage retu rns
nDefine barcode size and posit ion
nRead firmware revision and printer status information
nDefine label size, an d paper orientatio n
nPrint graphics in inverse text mode and print enl arged characters
See the pages that follow for listing s of commands arranged alpha betically and by function.

Alphabetical Command List

NAME DESCRIPTION
CR Carriage Return
DC4 Cancel Double Wide Mode
ESC * Reset to Defaults
ESC @ Reset to Power-up Condition
ESC A Return Pr inter Status
ESC a Return Hardware Status
ESC B SetDot Tab
ESC c Set Print Temperatur e to Low
ESC D Set Bytes per Line
ESC d Set Print Temperature to Medium
ESC E FormFeed
ESC e Set Print Temperatur e to Default
ESC F 1 nFeed nLines
13

Chapter 4