APC AP9619, AP9618 Installation in a UPS, Overview Turn off all power, Smart-UPS or Matrix-UPS

Installation in a UPS

Overview

Step 1: Turn off all power

You can install the Management Card in a card slot in a Smart-UPS, Matrix-UPS, or Symmetra. For a Silcon UPS, the Management Card installs in a Silcon Triple Expansion Chassis (AP9604S).

You do not need to turn power off for a Symmetra UPS.

(Smart-UPS or Matrix-UPS)

Caution

Damage to the UPS or Management Card can result if you do not remove all AC and DC power from a Smart-UPS or Matrix-UPS model UPS.

Smart-UPS

1.Turn off the equipment that connects to the UPS.

2.Disconnect the UPS from its AC input source.

3.Press the OFF button on the UPS for approximately five seconds to turn off the DC (battery) power.

Matrix-UPS

1.Turn off the equipment that connects to the UPS.

2.Turn off the circuit breaker on the rear panel of the UPS.

6 Installation and Quick-Start Manual