APC AP9619, AP9618 quick start manual See the Network Management Card Quality

Quick Configuration

BOOTP. You can use an RFC951-compliant BOOTP server to configure the TCP/IP settings the Management Card needs.

1.Enter the Management Card’s MAC and IP addresses, the subnet mask, and default gateway settings, and an optional Bootup File Name in the BOOTPTAB file of the BOOTP server.

See the Network Management Card Quality

Assurance slip for the MAC address.

2.When the Management Card reboots, the BOOTP server provides it with the TCP/IP settings.

–If you specified a bootup file name, the Management Card will attempt to transfer that file from a TFTP or FTP server residing on the BOOTP server. The Management Card will assume all settings specified in the bootup file.

–If you did not specify a bootup file name, the Management Card can be configured remotely by using Telnet or by using the Web interface: User Name and Password are both apc, by default.

You must use the APC Management Card Wizard or the APC initialization (*.ini) text-to-binary configuration (*.cfg) conversion utility, i2c300, to create the bootup file. To create a bootup file, see the BOOTP section in the Management Card Addendum (.\doc\addendum.pdf).

12 Network Management Card