APC AP9619, AP9618 quick start manual You can use FTP enabled by default to download new

How to Access a Configured Network Management Card

FTP	You can use FTP (enabled by default) to download new
	firmware to a Management Card, or to access a copy of a
	Management Card’s event or data logs.
	1. At a command prompt, type ftp address and press
	ENTER, where address is the Management Card’s IP
	address.
	2. Enter the User Name and Password (apc by default).
APC	You can use the APC Management Card Wizard to configure
Management	multiple Management Cards over the network.
Card Wizard
Analog modem	The AP9618 Network Management Card EM/MDM has an
(AP9618)	internal analog modem you can use for dial-in access to its
	Management Card’s control console.

18 Network Management Card