Command Line Interface (CLI) User’s Guide 15
Outlet Commands
off
Syntax:
all
off outlet|range[,outlet|range...]
Description: Turn off one or more outlets. If you
specify more than one outlet, the outlets will turn
off approximately at the same time. However, for
close synchronization, outlets must be configured
as part of a synchronized outlet group.
Parameters:
Example:
off 1,5-7
Output Format (for the preceding example):
OK
1: Database Server: Outlet turned off.
5: Disk Array PS 1: Outlet turned off.
6: Disk Array PS 2: Outlet turned off.
7: Disk Array PS 3: Outlet turned off.
Example:
off “Web Server”
Output Format (for the preceding example):
OK
2: Web Server: Outlet turned off.
3: Web Server: Outlet turned off.
Error Messages:
E101, E104
all The value all turns off all outlets of the
Switched Rack PDU. This value is not case-
sensitive.
outlet An outlet name or number. If you specify a
name that contains a Space character, you
must enclose the name in quotation marks.
range A range of outlet numbers, with a hyphen
separating the starting number from the
ending number.