APC Command Line Interface Reboot outletrange,outletrange, Reboot 1,5-7, Reboot Web Server

Command Reference: Outlet Commands

reboot

Syntax:

all

reboot outletrange[,outletrange...]

Description: Remove and then restore power to one or more outlets. The CLI does not wait for the reboot command to complete before providing output and re-displaying the CLI prompt (APC> ). If you specify more than one outlet, the outlets will turn off and on approximately at the same time. However, for close synchronization, outlets must be configured as part of a synchronized outlet group.

Parameters:

all	The value all removes and then restores power
	to all outlets of the Switched Rack PDU. This
	value is not case-sensitive.
outlet	An outlet name or number. If you specify a
	name that contains a Space character, you
	must enclose the name in quotation marks
range	A range of outlet numbers, with a hyphen
	separating the starting number from the
	ending number.

Example:

reboot 1,5-7

Output Format (for the preceding example):

OK

1:Database Server: Outlet rebooting.

5:Disk Array PS 1: Outlet rebooting.

6:Disk Array PS 2: Outlet rebooting.

7:Disk Array PS 3: Outlet rebooting.

Example:

reboot “Web Server”

Output Format (for the preceding example):

OK

2:Web Server: Outlet rebooting.

3:Web Server: Outlet rebooting.

Error Messages: E101, E104

20 Command Line Interface (CLI) User’s Guide