APC Command Line Interface - page 30

Command Reference: Switched Rack PDU Commands
26 Command Line Interface (CLI) User’s Guide
nearoverloadwarning
Syntax (to read the nearoverload alarm
threshold):
nearoverloadwarning [phase_number]
Syntax (to set the nearoverload warning
threshold):
nearoverloadwarning phase_number current
Description: Set or read the near-overload
warning threshold.
Parameters:
Access: Administrator or device manager
(device-only user).
Output format, reading the near-overload
alarm threshold:
OK
Near overload warning threshold is currentA.
Output format, setting the near-overload alarm
threshold:
OK
Setting near overload warning threshold for
phase_number to currentA.
Error Messages: E101, E104
phase_number The number (1, 2, or 3) of the phase
whose near-overload warning
threshold you want to read or set. The
default is phase 1.
current The threshold, in amps, to set for the
phase specified as phase_number.