6Troubleshooting
Note The TIMEOUTS.PS Þle affects printer operation. If the printer is shared on a network, using this Þle may affect the prints requested by other users.
1.Locate the utility Þles in the PHSR380 directory on the printerÕs
2.Copy the TIMEOUT.PS Þle to your hard disk.
3.Open the Þle using a text editor. The default value is 40 seconds for the wait timeout. Change the value in the WaitTimeOut line to 999.
4.Use one of the following methods to send the TIMEOUTS.PS Þle to the printer:
■PC users: Use the DOS COPY command to send the Þle to the printer. (Windows 3.1 users can also use the Copy command in the File Manager.)
■Workstation users: Send the Þle to the printer as you would any PostScript Þle.