Tektronix 380 manual Unlocking the transit restraint

2Getting Set Up

Unlocking the transit restraint

Caution To avoid damaging the printer, always turn the printer power on and off using the rear panel On/Off switch. Turn the printer power on before unlocking the transit restraint.

1.Turn the printer power on using the rear-panel On/Off switch.

2.The transit restraint lock is located on the right side of the printer. Insert a wide ßat-blade screwdriver or large coin into the lock slot.

3.While pushing inward with slight pressure, turn the lock button counterclockwise until it springs out ßush with the side of the printer.

3

2

9662-06

Caution If you move or ship the printer, be sure to lock the transit restraint to protect the printhead from damage. Refer to ÒMoving your printerÓ on page 5-53 for more information.

2-26Phaser 380 Color Printer