Tektronix 380 manual Selecting the cleaning page source

Using the Front Panel 7

Selecting the cleaning page source

The printer picks sheets of paper from a designated media tray as part of its self-maintenance and jam recovery routines. The default cleaning page source for the printer is the upper tray. When the Lower Paper Tray Assembly is installed, you can change the source of the cleaning page to the lower tray to prevent the printer from using transparencies or letterhead loaded in the upper paper tray.

You can change the cleaning page source through the front panel or by sending a PostScript language Þle to the printer (refer to the printerÕs CD-ROM). To change the cleaning page source from the printerÕs front panel, follow these steps:

1.While the Ready message or the printerÕs name is displayed, press the Menu button. The printer displays the setup menu:

Help Pages

<---- ----> Menu

2.Using the left arrow (<----)or right arrow (---->)buttons, scroll through the selections until the following message appears:

Printer Defaults

<---- ----> Menu

3.Press the Menu button to access the printer defaults settings.

4.Using the left arrow (<----)or right arrow (---->)buttons, scroll through the selections until the following message appears:

Cleaning Page Source

<---- ----> Menu

5.Press the Menu button to access the cleaning page source settings.

Cleaning Page Source:Upper

<---- ----> OK

6.Scroll through the settings until you reach the one you want. Press the OK button to conÞrm the setting.

7.To return to the top level of the menu, press the Exit button until the printer displays the Ready message.

User Manual 7-9