Tektronix 380 manual Using the Windows NT 3.51 PostScript driver

3Printing Basics

Using the Windows NT 3.51 PostScript driver

If you are using Microsoft Windows NT, follow the instructions in ÒInstalling printer software for Windows NT 3.51Ó on page 2-38 to install a Windows NT PostScript driver with a Phaser 380 printer. You can select printer page sizes in the driver for Windows NT applications, however, TekColor color corrections and other PostScript Level 2 features are not supported by the Windows NT driver. Refer to page 3-24 for instructions on selecting color corrections from the printerÕs front panel or from downloadable utility Þles. Refer to your Microsoft Windows NT documentation for details on features in the Windows NT driver.

Using the Windows NT 4.0 PostScript driver

Setting up installed options

Note If you are not sure which printer options you have installed, the printerÕs Startup Page lists some of this information, such as SCSI hard disks. You can print a copy of the Startup Page from the printerÕs front panel.

1.From the Properties dialog box, click the Device Settings tab.

2.In the Device Setting sheet, scroll to the end of the list to Installable Options.

3.Under Installable Options, highlight Optional Lower Tray.

4.In the box that appears at the bottom of the window, click Installed.

5.Select other options you have installed.

6.Click OK to return to the Control Panel.

3-12Phaser 380 Color Printer