Tektronix 380 manual Check the printer’s language mode

Troubleshooting 6

Check the printer’s language mode

If your Þle doesnÕt print, the language on the printerÕs port you are using may have been changed.

1.Print a copy of the printerÕs ConÞguration Page to see the language mode on each port. Refer to the on-line manual on the printerÕs CD-ROM for instructions on printing a ConÞguration Page.

2.If the printer port you are using has the wrong language set for the type of application you are using, send one of the following utility Þles to the printer:

■To print PostScript Þles, use the PSCRIPT.PS Þle to set up a port to receive PostScript. Refer to the on-line manual on the printerÕs CD-ROM for details.

■To print HP-GL Þles, use the HPGL.PS Þle to set up a port to receive HP-GL. Refer to the on-line manual on the printerÕs CD-ROM for details.

■To print PostScript, or HP-GL, or Monochrome PCL5 Þles interchangeably, use the AIS.PS Þle to set up a port for automatic language selection. Refer to the on-line manual on the printerÕs CD-ROM for details.

User Manual 6-25