Command Reference: Switched Rack PDU
overloadalarm
Syntax (to read the overload alarm threshold):
overloadalarm [phase_number]
Syntax (to set the overload alarm threshold):
overloadalarm phase_number current
Description: Set or read the overload alarm threshold.
Parameters:
phase_number | The number (1, 2, or 3) of the phase |
| whose overload alarm threshold you |
| want to read or set. The default is |
| phase 1. |
current | The threshold, in amps, to set for the |
| phase specified as phase_number. |
Access: Administrator or device manager
Output format, reading the overload alarm threshold:
OK
Overload alarm threshold for phase_number is currentA.
Output format, setting the overload alarm threshold:
OK
Setting alarm threshold for phase_number to currentA
Error Messages: E101, E104
Command Line Interface (CLI) User’s Guide | 27 |