Optional Supplies & Tools
Here is a list of optional tools mentioned in the manual that will help you build the EP Zero ARF.
❏Great Planes C.G. Machine™ (GPMR2400)
❏Clear packing tape
IMPORTANT BUILDING NOTES
•When you see the term test fit in the instructions, it means that you should first position the part on the assembly without using any glue and then slightly modify or custom fit the part as necessary for the best fit.
•Whenever the term glue is written you should rely upon your experience to decide what type of glue to use. When a specific type of adhesive works best for that step, the instructions will make a recommendation. Since this model is constructed from foam, we recommend the use of
•Whenever just epoxy is specified, you may use either
•Photos and sketches are placed before the step they refer to. Frequently you can study photos in following steps to get another view of the same parts.
ORDERING REPLACEMENT PARTS 
Replacement parts for the Great Planes EP Zero ARF are available using the order numbers in the Replacement Parts List that follows. The fastest, most economical service can be provided by your hobby dealer or
To locate a hobby dealer, visit the Hobbico web site at www.hobbico.com. Choose “Where to Buy” at the bottom of the menu on the left side of the page. Follow the instructions provided on the page to locate a U.S., Canadian or International dealer. If a hobby shop is not available, replacement parts may also be ordered from Tower Hobbies® at www.towerhobbies.com, or by calling toll free (800)
Parts may also be ordered directly from Hobby Services by calling (217)
Mail parts orders and payments by personal check to:
Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Be certain to specify the order number exactly as listed in the Replacement Parts List. Payment by credit card or personal check only; no C.O.D.
If additional assistance is required for any reason contact Product Support by
Replacement Parts List
Order Number | Description | How to Purchase |
| Missing pieces | Contact Product Support |
| Instruction manual | Contact Product Support |
| Not available | |
GPMG0215 | Gear Drive | Contact Hobby Supplier |
GPMG0860 | Replacement Shaft | Contact Hobby Supplier |
| with Spur Gear |
|
GPMG0311 | Replacement Motor | Contact Hobby Supplier |
GPMQ1682 | 10x4.5 Propeller | Contact Hobby Supplier |
GPMQ4620 | Prop Saver | Contact Hobby Supplier |
GPMA2792 | Hardware Bag | Contact Hobby Supplier |
GPMG0216 | Motor/Gear Drive Assembly Contact Hobby Supplier | |
GPMQ4619 | Prop Saver Rubber Bands | Contact Hobby Supplier |
METRIC CONVERSIONS
1" = 25.4 mm (conversion factor)
1/64" | = | .4 mm | 3/4" | = | 19.0 mm |
1/32" | = | .8 mm | 1" | = | 25.4 mm |
1/16" | = | 1.6 mm | 2" | = | 50.8 mm |
3/32" | = | 2.4 mm | 3" | = | 76.2 mm |
1/8" | = | 3.2 mm | 6" | = 152.4 mm | |
5/32" | = | 4.0 mm | 12" | = 304.8 mm | |
3/16" | = | 4.8 mm | 18" | = 457.2 mm | |
1/4" | = | 6.4 mm | 21" | = 533.4 mm | |
3/8" | = | 9.5 mm | 24" | = 609.6 mm | |
1/2" | = | 12.7 mm | 30" | = 762.0 mm | |
5/8" | = | 15.9 mm | 36" | = 914.4 mm | |
5
